SunStar SWF/B Series User Manual page 91

Press to check if the original
design is separated. Move the cursor
to #35.
■ DESIGN FILTERING: Optimizing the selected design
Ex) Editing the design in #5 setting its minimum stitch width at over 0.3mm and storing it in #17
(number of stitches: 18294)
Call the design in #5 and press
Place the cursor at "3.DESIGN
FILTERING" and press
Use UP/DOWN key to move the
cursor to input 0.3mm
Press
16)
17)
35)
36)
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
DESIGN FILTERING
LENGTH = 0.1
DESIGN FILTERING
LENGTH = 0.3
10898
55961
1000
17294
[mm]
[mm]