Advertisement
SWF EMBROIDERY MACHINE
SWB-E-08
[T] OPERATION BOX
A. Content
B. Order
C. Details
Picture 1
Picture 4
─ Ver.2009 1st
How to Change Version
No.
Order
1
Turn ON the machine
2
Select START key
3
Insert FDD or USB
4
Install program and data
5
Update thread sensing
board
6
Configure machine
settings
1. Version Change
1) Turn ON the machine and press left and right frame move key
2) At the screen shown in [Picture 4], use F1 ↑ and F2 ↓ arrow
────────────────────── SunStar Co., Ltd ─
CD CODE No:
Tools Required
[Picture 3] when SWF logo image as in [Picture 2] appears.
keys to move the cursor to 'PROGRAM' under INSTALL and
press F7 SELECT to enter the screen in [Picture 5].
JIG /
Instruments
-
-
-
-
-
-
-
-
Picture 2
Picture 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SunStar SWF SWB-E-08
Summary of Contents for SunStar SWF SWB-E-08
- Page 1 2) At the screen shown in [Picture 4], use F1 ↑ and F2 ↓ arrow keys to move the cursor to 'PROGRAM' under INSTALL and press F7 SELECT to enter the screen in [Picture 5]. Picture 4 ─ Ver.2009 1st ────────────────────── SunStar Co., Ltd ─...
- Page 2 Selecting THREAD under INSTALL in [Picture 4] creates the same screen. 7) If you want to upgrade the program of thread sensing board, press F1 GO key. To cancel, press F3 CANCEL. Picture 7 ─ Ver.2009 1st ────────────────────── SunStar Co., Ltd ─...
- Page 3 8) Lastly, check the machine information at the initial embroidery screen. Check below; CONTROL MODULE -> JUMP MAI_MOTOR QAMP_X, QAMP_Y Picture 9 Picture 8-1 Head No. Set Picture 8-2 Color No. Set Picture 8-3 Setting Trim Type Picture 8-4 Setting Y-Frame ─ Ver.2009 1st ────────────────────── SunStar Co., Ltd ─...
- Page 4 Picture 8-6 Setting alternative function Size Picture 8-8 Setting Sequin Picture 8-7 Setting Wheel Picture 8-10 Setting Basic Value in Y- Picture 8-9 Setting Basic Value in X-Satin Satin Picture 8-10 Setting Cording ─ Ver.2009 1st ────────────────────── SunStar Co., Ltd ─...
Need help?
Do you have a question about the SWF SWB-E-08 and is the answer not in the manual?
Questions and answers