SunStar SWF/B Series User Manual page 6

1-2) MACHINE
INSTALLATION
CAUTION
1-3) MACHINE
OPERATION
WARNING
Installation environment may incur machine malfunction or breakdown.
Make sure to meet the following conditions.
1) The foundation under the machine, i.e. table or desk, must be strong enough
to support the weight of the machine.
2) Air conditioning can eliminate dust and humidity that can cause pollution
and corrosion of the machine. Make sure your machine is regularly cleaned.
3) Long exposure to direct sunlight can cause the paint of the machine to fade
or change of machine shape.
4) Allow at least 50cm (20 inches) of space on each side of the machine for
convenient maintenance.
* Please refer to
2. Machine Installation and Assembly
The SWF Single-Head Automatic Embroidery Machine is designed for
applying embroidery to fabric and other similar materials.
Pay careful attention to the CAUTION and WARNING stickers placed on
the machine. While operating the machine, please observe the following:
1) Read thoroughly and fully understand the manual before operating the
machine.
2) Dress for safety. Long and unbound hair, jewelry such as necklaces,
bracelets, and wide sleeves can get caught in the machine. Wear shoes with
non-slip soles.
3) Clear all persons from the machine before turning on the power.
4) Keep your hands or head away from the moving parts of the machine such
as needle, hook, take-up lever, and pulley when the machine is in operation.
5) Do not remove the safety cover on the pulley or shaft when the machine is
in operation.
6) Be sure the main power is turned off and the power switch is set to OFF
before opening the cover of any electrical component or control box.
7) Be sure the main switch is OFF before manually turning the main shaft.
8) Turn the machine off when threading needles or inspecting the finished
embroidery.
9) Do not lean against the cradle or place your fingers near the guide grooves
of the frame.
for installation details.