SunStar SWF/B Series User Manual page 60

The following screen will appear after
all data has been read from the tape.
To store the data, move the cursor to
"YES" and press
■ EXTERNAL OUTPUT: Outputting Design
Ex) Sending data to another SWF machine via SERIAL communication.
Call the desired design and select
→ "4. EXTERNAL
OUTPUT"
When the receiving machine presses
SET, the data will be transmitted with
the following screen.
.
1. SERIAL
2. PARALLEL
DO YOU WANT TO SAVE ?
[YES]
※ The tape format is automatically detected as
shown above. Procedures for GNT4604 and
SERIAL are the same.
EXTERNAL OUTPUT
==> DATA PENDING !
EXTERNAL OUTPUT
==> DATA SENDING !
[NO]