Smart7 Interface Cable (Optional Accessory); Table 27: Smart7 Connector Pin Out - Novatel SMART7 Installation And Operation Manual

APPENDIX A SMART7 Technical Specifications
A.6 SMART7 Interface Cable (Optional Accessory)
The NovAtel part number for the SMART7 interface cable is 01019944. This cable provides
access to all of the signals available on the SMART7 14-pin Tyco Ampseal connector. The
exposed wires (BATT+ and BATT-) can then be connected to a vehicular power circuit (or equi-
valent) protected by a 5 A slow blow fuse (user supplied).
Dimensions are in millimeters.
COM1-TXD
COM1-RXD
COM2-TXD
COM2-RXD
SMART7 Installation and Operation User Manual 0C
Figure 40: SMART7 Interface Cable

Table 27: SMART7 Connector Pin Out

Signal Name J1
1
2
3
4
J2 J3 J4 J5 E1
2
3
2
3
E2
136