Taillight Assembly - Tracker Off-Road 500S Service Manual

PK324
3. Remove the two cap screws securing both left and
right pivot panels to the tailgate. Unlatch the tailgate
from the cargo bed; then with the aid of an assistant,
tilt the tailgate down and lift up to remove.
PK325
INSTALLING
1. Place the tailgate into position; then tilt up and latch
to the cargo bed.
PK326
2. Secure each pivot panel using the two cap screws. Install
each rear reflector panel using the two cap screws.
PK325
PK324
3. Using the shoulder head cap screws, secure the cargo
bed cables to the tailgate.

Taillight Assembly

REMOVING
1. Remove the cap screws and lock nuts securing the
taillight assembly to the ROPS tube.
2. Remove the two nuts and cap screws securing the
steel tie-down to the cargo box.
PK023
3. Remove the six plastic screws securing the rear
fender to the cargo box. Remove the rear fender.
37