Tracker Off-Road 500S Service Manual page 69

MD1033
4. Remove the movable drive face and spacer. Account
for the movable drive face rollers and outer drive
face cover.
MD1035
MD1034A
MD1036
5. Using a 6 mm cap screw threaded into the fixed
driven face, spread the driven pulley by turning the
cap screw clockwise; then remove the V-belt.
KC132
6. Remove the fixed drive face.
MD1094
7. Remove the nut holding the driven pulley assembly;
then remove the driven pulley assembly.
MD1068
8. Using an impact screwdriver, remove the three Phil-
lips-head cap screws holding the air intake plate.
Remove the air intake plate.
MD1092
67