Tracker Off-Road 500S Service Manual page 36

PK148A
7. Remove the cap screws and plastic rivets securing the
dashboard to the front body panel and frame; then sep-
arate the top of the dash from the front body panel.
PK142B
PK143
8. Remove the two remaining cap screws securing the
bottom of the dash to the floorboard panel. Remove
the dashboard.
PK155
34
INSTALLING
1. To aid in installation of the dashboard, remove the
bottom of the lift support from the steering column
via the cap screw and nut. Account for the bushing.
Tilt the lift support out; then install the dashboard
into position.
PK156
2. Install the bushing; then secure the bottom of the lift
support to the steering column via the cap screw and
nut. Tighten securely.
3. Install and secure the two cap screws located toward
the outside edges of the dash to secure to the floor-
board.
PK155
4. Install the left and right side panel assemblies using
cap screws (A) and plastic rivets (B).
PK093B