Tracker Off-Road 500S Service Manual page 71

MD1286A
12. Remove the left-hand threaded nut holding the cen-
trifugal clutch assembly.
CAUTION
Care must be taken when removing the nut; it has "left-
hand" threads.
MD1014A
MD1016
13. Remove the cam chain.
FI630
14. Remove the oil pump drive gear cap screw.
MD1018
15. Remove oil pump drive gear. Account for the pin.
MD1017
16. Remove the snap ring holding the oil pump driven
gear.
MD1019
 NOTE: Always use a new snap ring when installing
the oil pump driven gear.
17. Remove oil pump driven gear. Account for the drive
pin and thrust washer.
69