Tracker Off-Road 500S Service Manual page 92

PK161A
PK162
21. Place the air box assembly into position; then secure
the cap screws and clamps. Connect the crankcase
breather hose to the air inlet tube.
PK160A
90
22. Install both left and right-rear splash panels; then
secure them using the reinstallable plastic rivets.
Install both left and right side panel assemblies (see
Dashboard).
PK108A
23. Pour the recommended amount of oil and coolant
into the engine and radiator.
PK024A
24. Connect the negative battery cable to the battery.
25. Install the engine compartment panel and seat.
26. Start the engine and check for leaks while allowing
the engine to warm up for several minutes; then shut
the engine off and check engine oil and coolant lev-
els.