Interfaces (Dsx) - ADTRAN Total Access 850 System Manual

Total Access 850 System Manual
I (T1) > S
NTERFACES
Displays the alarm history for the T1 interface. An asterisk in a field indicates that an alarm has occurred
on the T1 interface since the last clear history. Refer to Interfaces (T1) > Status > Alarms > Current
Alarms on page 96 for more details on listed alarm conditions.
I (T1) > S
NTERFACES
Selecting this activator will clear the Alarm History for the T1 interface.
I (T1) > S
NTERFACES
Displays the level (in dB) of the received T1 signal on the interface.
I (T1) > T
NTERFACES
These options are used to initiate local and remote loopback tests and display the test status.
I (T1) > T
NTERFACES
Loopback of the local unit. Choices are
data back toward the network. The transmitted data is the identical line code that was received, including
any bipolar violations.
P
from the received data and then regenerated for the transmitted data.
Default is .
N
ONE
I (T1) > T
NTERFACES
Loopback of remote unit. Choices are
data back toward the network. The transmitted data is the identical line code that was received, including
any bipolar violations.
P
from the received data and then regenerated for the transmitted data.
Default is N .
ONE
I (T1) > T
NTERFACES
Indicates whether a test is in progress.
64203376L1-1B
> A > A
TATUS LARMS
> A > C
TATUS LARMS
> R L
TATUS X EVEL
EST
> L LB
EST OC
N , L
ONE
loopback is similar to line loopback except that the framing is extracted
AYLOAD
> R LB
EST EM
,
N L
ONE INE
loopback is similar to line loopback except that the framing is extracted
AYLOAD
> T S
EST EST TATUS
© 2004 ADTRAN, Inc.
H
LARM ISTORY
H
LEAR ISTORY
, and P . L
INE AYLOAD INE
N
ONE
, and . loopback loops all of the received
P L
AYLOAD INE
N
ONE
Section 4 User Interface Guide
loopback loops all of the received
disables the loopback test.
disables the loopback test.
97