Interfaces (Dsx-1 Module); Interfaces (Ubr1Te Module) - ADTRAN Total Access 850 System Manual

Total Access 850 System Manual
I (UBR1TE M
NTERFACES
View the UBR1TE Module interface status and configure the UBR1TE Module parameters from this
menu.
I (UBR1TE) > C
NTERFACES
Configures the UBR1TE interface format and code from this menu.
I (UBR1TE) > C
NTERFACE
Indicates the slot in which the UBR1TE Module is installed.
I (UBR1TE) > C
NTERFACE
Choices are
L , L
UNT UNT W
LULT mode if being operated in the Adjacent to Customer or Tandem Office Source positions (see Figure
7). The MODE should be set to LUNT if the port is operated in the Adjacent to Switch or Tandem Office
64203376L1-1B
)
ODULE
ONFIG
> S
ONFIG LOT
> M
ONFIG ODE
. The U-BR1TE port should be configured to operate in the
/W , and L
AKEUP ULT
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
111