Total Access 850 System Manual
S
> R
ECURITY
ADIUS
This is the number of times the unit should send a request packet tho the
response before giving up. If the number of attempts to communicate with the primary server is equal to
the retry count, the second server (if defined) is tried. If the second server does not respond within the retry
count the third server (if defined) is tried. If the third server does not respond within the retry count, the
Telnet session is not authenticated and is dropped. The default is
DS0 M
APS
The DS0 Maps configuration fields only apply for T1 TDM applications.
The
menu allows you to map data and voice ports to the network T1 time slots. You may edit
DS0 M
APS
either of the two maps at any time. If you make changes to the current map, only those DS0s that have
changed will be updated (unchanged DS0s will not be affected.) The DS0 menu is shown in Figure 13.
64203376L1-1B
S
> R
C
ERVER
ETRY
OUNT
Figure 13. DS0 Maps Menu
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
(1-10)
R
ADIUS
5
.
without a
S
ERVER
179