ADTRAN Total Access 850 System Manual page 235

Total Access 850 System Manual
9. Select S T
TART RANSFER
Prior to the start of the upgrade, the transfer status will display
various status messages display in
describes these messages.
Message
Transferring... [X KB]
Flash Programmed
Successfully
Loaded code
ver x.x.x
chksum = xxxx
Resetting ....
RECV Error
Can not start tftp
client
**Reload
Transfer aborted
10. When the update has successfully completed, F
the T S
RANSFER TATUS
message. Finally the T
The Total Access 850 will restart immediately and resume operation. After giving the unit sufficient
time to reboot, the user may Telnet back into the unit and log in.
64203376L1-1B
to start the update. Enter Y to confirm the upgrade.
C U
URRENT
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the
Total Access 850 and the TFTP network server.
The unit has been upgraded successfully.
Unit displays the version and checksum of the upgraded code.
Unit is power cycling.
Unit will display this message if server filename is incorrect.
Unit will display this message if TFTP server address is incorrect.
A
User has selected
BORT
field. This will be followed by a L
S field displays R
RANSFER TATUS
© 2004 ADTRAN, Inc.
I . During the TFTP upload process,
DLE
S to indicate progress. The following table
PDATE TATUS
Meaning
T
.
RANSFER
P S
LASH ROGRAMMED
C
OADED ODE VER X
...
ESETTING
Section 5 DLP-7
displays briefly in
UCCESSFULLY
. . C =
X X HKSUM XXXX
235