Interfaces (Dsx) - ADTRAN 604 System Manual

Section 4 User Interface Guide
I (DSX)
NTERFACES
View the integrated DSX interface status and configure T1 parameters from this menu.
I (DSX) > C
NTERFACES
Configure the various DSX parameters and enable/disable loopbacks from this menu.
I (DSX) > C
NTERFACES
This sets the frame format for the DSX interface. The setting must match the frame format of the circuit to
which the interface is connected. Choices are
non-disruptive means of full-time monitoring on the facility datalink (FDL). Default is
I (DSX) > C
NTERFACES
This sets the line code for the DSX interface. The setting must match the line code of the circuit to which
the interface is connected. Choices are
inversion). Default is
B8ZS
I (DSX) > C
NTERFACES
Select the line build out for the DSX1 interface. The choices are
. Default is
-7.5 dB 0 dB
a full 0dB level signal (typically one with a DS1 long haul line interface).
I (DSX) > C
NTERFACES
Configures the Total Access 6XX to respond (
Inband CSU loopback pattern.
commands sent inband or over the FDL. Default is
I (DSX) > C
NTERFACES
Configures the sensitivity of the T1 receiver for this interface to provide increased sensitivity for long-run
T1 applications. Choices are
I (DSX) > S
NTERFACES
Displays the T1 status including performance data and alarm histories.
I (DSX) > S
NTERFACES
Displays the T1 performance data.
I (DSX) > S
NTERFACES
Provides current (15-minute window) status on key performance measures as specified in ANSI T1.403
and AT&T TR 54016 as well as historical statistical totals for the integrated DSX port.
78
ONFIG
> F
ONFIG ORMAT
ESF
> L C
ONFIG INE ODE
(bipolar with 8-zero substitution) and
B8ZS
.
> E
ONFIG QUALIZATION
. The setting is provided for terminal equipment that has trouble recovering
7.5 dB
> CSU L
ONFIG PBK
E
configures the Total Access 6XX to disregard ALL loopback
D A
ISABLE LL
> R S
ONFIG X ENSITIVITY
, , and
A -36 dB
UTO
TATUS
> P
TATUS ERFORMANCE
> P
TATUS ERFORMANCE
© 2004 ADTRAN, Inc.
Total Access 600 Series System Manual
, (D4). Extended Superframe (
SF
0 dB, 266
) or not respond (
NABLE
.
E
NABLE
.
-10 dB
> C
URRENT AND
) provides a
ESF
.
ESF
(alternate mark
AMI
, 399 , 533 , 655
FT FT FT
) to a received ANSI
D
ISABLE
T
OTALS
61200624L1-1B
or
,
FT