Advertisement
Quick Links
CLEI: VAMV200B_ _
Product P/N: 1172838G1
D
ESCRIPTION
The NetVanta 838T SHDSL Ethernet in the First Mile (EFM) is a
Metro‐Ethernet Forum (MEF) compliant, EFM bonded NTU
designed for cost‐effective deployment of voice and data services
to small and medium size businesses supporting up to eight two‐
wire SHDSL loops. The NetVanta 838T accepts SHDSL or
eSHDSL and delivers 10/100Base‐T Ethernet for customer LAN
extension. The NetVanta 838T terminates the SHDSL loops in RJ‐
48C connectors and supports data rates from 192 kbps to 5.7
Mbps per copper pair. The Total Access 838 provides an aggregate
data rate up to 45.6 Mbps over a single EFM bonding group.
F
EATURES
♦
MEF Compliant
♦
One integrated EIA‐232 configuration
port (DCE)
♦
Four integrated 10/100Base‐T Ethernet
ports
♦
Eight two‐wire eSHDSL loops
♦
WAN Protocol: IEEE 802.3ah EFM
bonding
♦
Command Line Interface (CLI)
♦
Front panel LEDs
♦
Wall mounting hardware included
♦
Remote Management ‐ CLI using Virtual Terminal, Telnet by
way of Management VLAN
NetVanta 838T
I
NSTALLATION AND
After unpacking the unit, inspect it for damage. If damage is
noted, file a claim with the carrier and then contact ADTRAN. For
more information, refer to the warranty.
Follow the steps listed below to wallmount or rackmount the
NetVanta 838T.
NOTE
Rack Mount Install Kits must be purchased seperately for
rackmount application.
♦
P/N 1172984G1 ‐ NetVanta 19‐Inch Rack Mount Install Kit
♦
P/N 1172985G1 ‐ NetVanta 23‐Inch Rack Mount Install Kit
1. Attach mounting brackets to the side of the NetVanta 838T
in the correct orientation for either rackmount or wallmount
using the two screws provided for each bracket (refer to the
illustration below for the correct orientation).
!
WARNING
Do not upset the stability of the equipment rack after installation
is complete.
jobAid
Issue Date: December 2010
Document P/N: 61172838G1-22B
T
-
URN
UP
19 inch
23 inch
Wall Mount
Mounting Bracket Orientations
1
Advertisement
Related Manuals for ADTRAN jobAid NetVanta 838T
Summary of Contents for ADTRAN jobAid NetVanta 838T
- Page 1 NetVanta 838T CLEI: VAMV200B_ _ Issue Date: December 2010 Product P/N: 1172838G1 Document P/N: 61172838G1-22B ESCRIPTION NSTALLATION AND The NetVanta 838T SHDSL Ethernet in the First Mile (EFM) is a After unpacking the unit, inspect it for damage. If damage is Metro‐Ethernet Forum (MEF) compliant, EFM bonded NTU noted, file a claim with the carrier and then contact ADTRAN. For designed for cost‐effective deployment of voice and data services more information, refer to the warranty. to small and medium size businesses supporting up to eight two‐ Follow the steps listed below to wallmount or rackmount the wire SHDSL loops. The NetVanta 838T accepts SHDSL or NetVanta 838T. eSHDSL and delivers 10/100Base‐T Ethernet for customer LAN extension. The NetVanta 838T terminates the SHDSL loops in RJ‐ NOTE 48C connectors and supports data rates from 192 kbps to 5.7 Rack Mount Install Kits must be purchased seperately for Mbps per copper pair. The Total Access 838 provides an aggregate rackmount application. data rate up to 45.6 Mbps over a single EFM bonding group. ♦ P/N 1172984G1 ‐ NetVanta 19‐Inch Rack Mount Install Kit ♦...
- Page 2 RONT ANEL 2. Secure the NetVanta 838T to the rack or wall. ♦ For Rackmount: Secure the NetVanta 838T to the Label Status Indication equipment rack with the appropriate screws. ♦ Power off For Wallmount: Prepare the mounting surface by Green Normal operation attaching a board (typically plywood, 3/4” to 1” thick) to a wall stud using appropriate lag bolts. Secure the Green/Yellow Alter‐ Normal operation and console NetVanta 838T to the plywood using two 3/32” to 1/8” nating open wood screws at least 1” in length. Yellow Software update in progress 3. Connect to a 100 V to 240 V AC socket outlet. Yellow/Red Alternat‐ Self‐test failed and console open NOTE Self‐test failed (not bootable) or device malfunctioned ♦ Connect to a reliably earthed 100 V to 240 V, 50/60 Hz AC ALARM Green No critical, major, or minor socket outlet. alarms on when In Service ♦...
- Page 3 RAFT INOUT EPLOYMENT UIDELINES The table below lists the pinout for a craft port. The table below lists the maximum rate of the SHDSL port for the associated line distance. Name Description Rate (kbps) Length (ft)* – No Connection (NC) 5696 2800 Receive Data (Output) 4096 3600 Transmit Data (Input) Data Terminal Ready 3088 5100 Signal Ground 2304 6300 – 1544 7900 – 1024 9800 – 11000 – 14800 19800 10/100B -T E THERNET INOUT * 26 AWG wire size minimum...
- Page 4 Warranty: ADTRAN will replace or repair this product within the warranty period if it does not ADTRAN CUSTOMER CARE: meet its published specifications or fails while in service. Warranty information can be From within the U.S. 1.800.726.8663 found online at www.adtran.com/warranty.
Need help?
Do you have a question about the jobAid NetVanta 838T and is the answer not in the manual?
Questions and answers