ADTRAN Total Access 850 System Manual page 234

Section 5 DLP-7
Perform the steps below in the order listed.
1. Connect to the Total Access 850 using the 10/100BASET interface.
If you are not already connected to the unit's
procedure in DLP-5, Connecting to the Total Access 850 Using Telnet, to connect to the unit.
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the System for details).
3. Verify the TFTP server is running on the network. The user may ping the TFTP server from the Total
Access 850 to verify communication.
A TFTP server ships as part of the ADTRAN Utilities. If using ADTRAN Utilities, choose
S > P
TART
4. Download the firmware upgrade file to your computer.
If using ADTRAN Utilities, save the upgrade file to the "ADTNUTIL" directory on your
hard drive.
5. Go to the S U
YSTEM
6. Go to the T
RANSFER
7. Set the TFTP S
ERVER
If using ADTRAN Utilities, this will be the IP address that appears in the TFTP S
S
TATUS
8. Enter the filename of the update file into the TFTP S
directory other than ADTNUTIL, the entire path and filename are required.
234
> ADTRAN U
ROGRAMS
menu and select the U
TILITY
M menu and select TFTP.
ETHOD
A to the IP address of the machine running the TFTP server program.
DDRESS
window.
© 2004 ADTRAN, Inc.
port using Telnet client software, use the
ETHERNET
> TFTP S
TILITIES ERVER
F menu; press <Enter>.
PDATE IRMWARE
F
ERVER ILENAME
Total Access 850 System Manual
to start the server.
field. If the file is located in a
64203376L1-1B
ERVER