ADTRAN Total Access 850 System Manual page 76

Section 4 User Interface Guide
Step
1
2
3
S C > M
YSTEM ONFIG
This option defines the amount of time in minutes user may stay connected without any activity on the
CRAFT port before the user is automatically logged out of the system. A value of
timer function enabling users to stay connected until manually logged out. The value range is
(minutes).
S C > M
YSTEM ONFIG
This is the asynchronous rate that the
,
9600, 19200, 38400 57600,
S C > M
YSTEM ONFIG
This is the asynchronous bit rate that the
S C > M
YSTEM ONFIG
This is the asynchronous parity that the
E .
VEN
S C > M
YSTEM ONFIG
This is the number of stop bits used for the
S C > M
YSTEM ONFIG
Activate the Telnet access and set up the various Telnet parameters from this menu. The Total Access 850
supports up to five simultaneous Telnet sessions.
The Total Access 850 ships with default Telnet Access parameters of: guest (user),
password (password). Change this password during the initial configuration to protect
your unit.
S C > M
YSTEM ONFIG
Sets A to O or O
CCESS N
76
Table 2. Instructions for Changing Passwords
Select the P
ASSWORD
Type the new password in the E
Type the new password again in the C
> CRAFT P
ANAGEMENT
> CRAFT P
ANAGEMENT
port will run. The possible values are
CRAFT
and . The default value is
115200
> CRAFT P
ANAGEMENT
CRAFT
> CRAFT P
ANAGEMENT
CRAFT
> CRAFT P
ANAGEMENT
CRAFT
> T
ANAGEMENT ELNET
> T
ANAGEMENT ELNET
. The factory default value for this parameter is
FF
© 2004 ADTRAN, Inc.
Action
field—a new P
ASSWORD
field.
NTER
ONFIRM
> I T
ORT DLE IME
> B R
ORT AUD ATE
.
9600
> D B
ORT ATA ITS
port will run. The possible values are
> P
ORT ARITY
port will run. The possible values are
> S B
ORT TOP ITS
port. The possible values are
A
CCESS
A > A
CCESS CCESS
Total Access 850 System Manual
field displays.
field.
0 disables this inactivity
0 (def) to
300, 1200, 2400, 4800,
7 or 8 (def) bits.
N (def),
ONE
(def), or
1 1.5 2
O .
N
64203376L1-1B
255
O , or
DD
.