ADTRAN Total Access 850 System Manual page 98
Adtran total access 850: system manual
Hide thumbs
Also See for Total Access 850:
- Installation and maintenance manual (10 pages) ,
- Installation and operation manual (10 pages) ,
- Job aid (2 pages)
Table of Contents
Advertisement
Section 4 User Interface Guide
I
(DSX)
NTERFACES
View the integrated DSX interface status and configure T1 parameters from this menu.
I
(DSX) > C
NTERFACES
Configure the various DSX parameters and enable/disable loopbacks from this menu.
I
(DSX) > C
NTERFACES
This sets the frame format for the DSX interface. The setting must match the frame format of the circuit to
which the interface is connected. Choices are
non-disruptive means of full-time monitoring on the facility datalink (FDL). Default is
I
(DSX) > C
NTERFACES
This sets the line code for the DSX interface. The setting must match the line code of the circuit to which
the interface is connected. Choices are
inversion). Default is
B8ZS
I
(DSX) > C
NTERFACES
Select the line build out for the DSX1 interface. The choices are
-7.5 dB
. Default is
0 dB
a full 0dB level signal (typically one with a DS1 long haul line interface).
I
(DSX) > C
NTERFACES
Choices are
,
E
D
NABLE
ISABLE
or not respond to CSU loop up commands.
I
(DSX) > C
NTERFACES
Configures the sensitivity of the T1 receiver for this interface to provide increased sensitivity for long-run
T1 applications. Choices are
I
(DSX) > S
NTERFACES
Displays the T1 status including performance data and alarm histories.
I
(DSX) > S
NTERFACES
Displays the T1 performance data.
I
(DSX) > S
NTERFACES
Provides current (15-minute window) status on key performance measures as specified in ANSI T1.403
and AT&T TR 54016 as well as historical statistical totals for the integrated DSX port.
I
(DSX) > S
NTERFACES
Identifies the interval (
C
98
ONFIG
> F
ONFIG
ORMAT
ESF
> L
C
ONFIG
INE
ODE
(bipolar with 8-zero substitution) and
B8ZS
.
> E
ONFIG
QUALIZATION
. The
7.5 dB
setting is provided for terminal equipment that has trouble recovering
> CSU L
ONFIG
PBK
, and
D
A
ISABLE
LL
> R
S
ONFIG
X
ENSITIVITY
A
,
-36 dB
, and
UTO
TATUS
> P
TATUS
ERFORMANCE
> P
TATUS
ERFORMANCE
> P
TATUS
ERFORMANCE
or
) for the listed performance statistics.
T
URRENT
OTAL
© 2004 ADTRAN, Inc.
,
SF
(D4). Extended Superframe (
0 dB, 266
. Default is
. This allows the unit to either respond
E
NABLE
-10 dB
.
> C
URRENT AND
> C
URRENT AND
Total Access 850 System Manual
ESF
) provides a
ESF
.
(alternate mark
AMI
, 399
, 533
, 655
FT
FT
FT
T
OTALS
T
> I
OTALS
NTERVAL
64203376L1-1B
,
or
FT
Hide quick links:
Advertisement
Chapters
Table of Contents
