Dlp-9 Saving The Current Configuration Using Tftp - ADTRAN Total Access 850 System Manual

DLP-9 Saving the Current Configuration Using TFTP

Introduction
The Total Access 850 supports configuration transfers from the unit (via the
to a TFTP server located on the network. This DLP provides the steps to follow for a successful
configuration transfer using the
Tools and Materials Required
• A PC with a Telnet client software
• A TFTP Server accessible on the local network (A TFTP server is provided with the unit as part of the
ADTRAN Utilities software.)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
64203376L1-1B
Ethernet port and a TFTP Server.
10/100BASET
© 2004 ADTRAN, Inc.
Ethernet port)
10/100BASET
239