Total Access 850 System Manual
AutoRepeat
Repeats characters you select from the keyboard, if you hold down the key.
Capture Menu
Identical to the Telnet
C
Help Menu
Provides online help and information about the version number.
Contents
Opens online help.
About
Displays version and owner information.
3.
TFTP SERVER
The TFTP Server utility transfers Total Access 850 configuration files to and from a TFTP server (see
Figure 3 for the menu tree). You can install this program on a PC running any version of Microsoft
Windows. The configuration of an Total Access 850 can be saved offline as a backup file. The saved file
may also be used to send the same configuration to multiple Total Access 850 units. Transfer configuration
files using the TFTP protocol (a TCP/IP user protocol) via the Ethernet port. The Total Access 850 must
have a valid IP address, subnet mask, and default gateway (if required), and be connected to an Ethernet
network before proceeding. Figure 4 shows the TFTP server interface. For information on transferring and
saving configurations using TFTP, refer to DLP-9, Saving the Current Configuration Using TFTP.
Files must be placed in the Application directory where you installed the product.
Received files are also placed here.
64203376L1-1B
M
(see Capture Menu on page 272).
APTURE
ENU
Server
TFTP Server
Print Log
Help
Figure 3. TFTP Server Interface Menu Tree
© 2004 ADTRAN, Inc.
Section 6 ADTRAN Utilities
Enable
Disable
Abort
Exit
...to Clipboard
...to Printer
Clear Log
Contents
About
275