Total Access 850 System Manual
From the same computer used in the previous step, Telnet to the Total Access 850 and verify that the
Telnet session is properly opened (see DLP-5, Connecting to the Total Access 850 Using Telnet). Once
the Telnet session is established, press <
Refer to the documentation of the computer system if you are unsure how to perform a
Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX
allow a Telnet to be performed by simply typing Telnet <IP Address> at a command line
prompt. Telnet is a utility common on many local area networks that allows remote access
to another computer or piece of equipment.
64203376L1-1B
> to logout and close the session.
CTRL+L
© 2004 ADTRAN, Inc.
Section 5 DLP-4
223