Quad Fxo Access Module (P/N 1175407L1); Table 22. Quad Fxs Module Compliance Codes; Table 23. Quad Fxo Module Faceplate Leds - ADTRAN Total Access 850 System Manual

Total Access 850 System Manual
Table 21. Quad FXS Module Specifications (Continued)
Signal to Distortion
Ratio
Relative Humidity
Temperature
Tests
Compliance Codes
Table 22 provides the compliance codes for the Total Access 850 Quad FXS Module.
CODE
Power Code (PC)
Telecommunication Code (TC)
Installation Code

Quad FXO Access Module (P/N 1175407L1)

The Quad FXO Access Modules use the 50-pin female amphenol connector on the rear of the Total Access 850
chassis to provide the interconnect wiring for the four analog circuits on each access module.
Faceplate LEDs
The faceplate LEDs provide status information using a color coded message format. Table 23 gives a
description of all faceplate LEDs for the Quad FXO Module when used with the Total Access 850 system.
For these LEDs...
BUSY
64203376L1-1B
0 to -30 dBm0: > 33 dB
-30 to -40 dBm0: > 27 dB
-40 to -45 dBm0: > 22 dB
Up to 95% noncondensing
Operate at -40 °C to +65 °C
Store at -40 °C to +70 °C
Self-test, digital loopback, network on-hook/off-hook, customer
ring, and 1000 Hz (1 kHz) tone generation

Table 22. Quad FXS Module Compliance Codes

Table 23. Quad FXO Module Faceplate LEDs

This color light... Indicates that...
OFF the interface is currently on-hook and not in use.
GREEN the interface is currently off-hook (busy).
Blinking GREEN the interface is ringing.
Sequencing 1-4 the assigned network T1 time slot is unavailable for use
by the module.
© 2004 ADTRAN, Inc.
Section 2 Engineering Guidelines
IN OUT
C C
– X
A –
43