ADTRAN Total Access 850 System Manual page 178

Section 4 User Interface Guide
F L N
ILTER IST AME
Selects between filters defines in the list. Default is no entry in filter list name.
N O
EXT PER
The next operation to use to combine with the next filter in the list (default is
END
AND
OR
H C
IT OUNT
Displays the number of packets that match the criteria for the defined filter.
S > R
ECURITY ADIUS
The parameters for the
Telnet radius is only available in A.04 firmware or later.
S > R
ECURITY ADIUS
This is the IP address of the first
authenticating a Telnet session. Default is
S > R
ECURITY ADIUS
This is the IP address of the second
the primary server does not respond. Default is
S > R
ECURITY ADIUS
This is the IP address of the third
the primary server does not respond. Default is
S > R
ECURITY ADIUS
This is the UDP port the unit should use when communicating with the
1812 , which the commonly used port.
S > R
ECURITY ADIUS
The and unit share this text string. It is used by the
R S
ADIUS ERVER
the RADIUS client. The factory default is not to use a secret.
178
the last filter to combination.
logically AND this filter with the next filter in the list.
logically OR this filter with the next filter in the list.
S
ERVER
are configured in this menu.
R S
ADIUS ERVER
S > S
ERVER ERVER
R S
ADIUS ERVER
0.0.0.0
S > S
ERVER ERVER
R S
ADIUS ERVER
S > S
ERVER ERVER
R S
ADIUS ERVER
S > UDP P
ERVER ORT
S > S
ERVER ECRET
© 2004 ADTRAN, Inc.
1
that the unit should attempt to communicate with when
.
2
that the unit should attempt to communicate with when
.
0.0.0.0
3
that the unit should attempt to communicate with when
.
0.0.0.0
R
ADIUS
Total Access 850 System Manual
):
E
ND
R S . The default is
ADIUS ERVER
to authenticate the unit,
S
ERVER
64203376L1-1B