Hub Connection; 3Com Nbx Telephone Set Connection - 3Com WL-308 Manual

the list, you must access the bridge's configuration management system. Details
on this procedure are in "Refreshing the Client List" on page 15.

Hub Connection

You can supply network connections for up to four devices, such as computers
and printers, by connecting the bridge to an Ethernet hub, as shown below.
Make sure that the workgroup bridge Ethernet cable is plugged into the hub
uplink (MDIX) port. If your hub does not have an uplink port, you must use an
Ethernet crossover cable (not provided), which can be connected in any port.
3Com NBX You can provide converged voice and data services in an office cubicle that is not
Telephone Set wired for Ethernet by connecting the bridge to a 3Com NBX telephone set as
Connection shown below. The NBX server is connected to the same switch or router to which
the access point is connected.
Connecting the Bridge 9