Commissioning With Starter - Siemens SINAMICS DCM Operating Instructions Manual

Descriptions of functions
10.16 Technology controller

Commissioning with STARTER

The "technology controller" function module can be activated via the commissioning wizard
or the drive configuration (configure DDS).
You can check the actual configuration in parameter r0108.16.
Application example: Level control
The objective here is to maintain a constant level in the container.
This is carried out by means of a variable-speed pump in conjunction with a sensor for
measuring the level.
The level is determined via an analog input and sent to the technology controller. The level
setpoint is defined in a fixed setpoint. The resulting controlled variable is used as the setpoint
for the speed controller.
Figure 10-61 Level control: Application
Figure 10-62 Level control: Controller structure
544
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A