Application Classes - Siemens SINAMICS DCM Operating Instructions Manual

Descriptions of functions
10.3 Communication according to PROFIdrive
10.3.1

Application classes

There are different application classes for PROFIdrive according to the scope and type of the
application processes. PROFIdrive features a total of six application classes, two of which
are discussed here.
Application class 1 (standard drive)
In the most basic case, the drive is controlled via a speed setpoint by means of PROFIBUS/
PROFINET. In this case, speed control is fully handled in the drive controller. Typical
application examples include simple frequency converters for controlling pumps and fans.
Figure 10-1
376
Application class 1
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A