Commissioning Optional Additional Modules - Siemens SINAMICS DCM Operating Instructions Manual

8.7

Commissioning optional additional modules

Additional modules can be integrated via DRIVE-CLiQ (TM15, TM31, TM150, SMC10,
SMC30) - or via the option slot of the Control Unit CUD (CBE20).
The components must be logged in to the firmware during a first commissioning.
That can be done:
● Offline by inserting the components into the project in STARTER and loading the project
into the drive
● By adding the components through the parameter assignments on BOP20 / AOP30
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
8.7 Commissioning optional additional modules
Commissioning
291