Ordering Information For Accessories - Siemens SINAMICS DCM Operating Instructions Manual

Table 2- 2 Additional options
Option
Terminal Module Cabinet (TMC)
Can be snapped onto a 35 mm mounting rail.
Enables the simple connection of the CUD standard signals (X177) via spring-loaded
terminals in an easily accessible area of the control cabinet.
The CUD is equipped with an adapter board. Terminal Module Cabinet and connecting cable
(3 m) are supplied separately.
Notes:
In the device version with option G63, the X177 terminal connections are no longer
•
available directly on the CUD.
When ordering, please specify which CUD (at the left or right slot) is to be equipped with
•
the option.
If two CUDs are to be equipped with option G63, the option must be ordered for each
•
CUD.
Coated modules
Coated modules increase the degree of ruggedness with respect to climatic effects:
Relative / absolute humidity 5% to 95% / 1 to 29 g/m
medium temperature ≤30 °C
≤ 60% with the occurrence of SO
temperature 30 °C to 40 °C
Oil mist, salt mist, formation of ice, condensation, dropping, spray, splashing and jet-water not
permissible.
Field power unit 2Q
Without field power unit
Nickel-plated copper bars (in the field power unit)
Control for switching over the power unit topology for devices connected in parallel and series
This option is described in the application document "12-pulse applications".

Ordering information for accessories

Table 2- 3 Articles numbers for accessories
Article
Standard CUD retrofit kit
Combination of the spare parts, Standard CUD and connector board
Standard CUD coated retrofit kit
Combination of the spare parts, Standard CUD coated and connector board coated
Advanced CUD retrofit kit
Combination of the spare parts, Advanced CUD and connector board
Advanced CUD coated retrofit kit
Combination of the spare parts, Advanced CUD coated and connector board coated
Fuse monitoring module
Fuse monitoring distributor
incl. 3 m ribbon cable to connect to the SINAMICS DCM Control Module;
can be snapped onto mounting rails according to DIN EN 50022-35x7.5
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A
for ambient temperature or cooling
3
and H S and/or for ambient temperature or cooling medium
2 2
2.3 Ordering information for options and accessories
Ordering information
Order codes
G63
M08
L11
L10
M10
S50
Article number
6RY1803-0AA00-0AA1 +
6RY1803-0GA00
6RY1803-0AA20-0AA1 +
6RY1803-0GA20
6RY1803-0AA05-0AA1 +
6RY1803-0GA00
6RY1803-0AA25-0AA1 +
6RY1803-0GA20
6RY1803-0CM02
6RY1803-0CM26
27