Siemens SINAMICS DCM Operating Instructions Manual page 8

Preface
Use of OpenSSL
This product contains software that has been developed by the OpenSSL project for use in
the OpenSSL toolkit.
This product contains cryptographic software created by Eric Young.
This product contains software developed by Eric Young.
Compliance with the General Data Protection Regulation
Siemens respects the principles of data protection, in particular the data minimization rules
(privacy by design).
For this product, this means:
The product does not process neither store any person-related data, only technical function
data (e.g. time stamps). If the user links these data with other data (e.g. shift plans) or if he
stores person-related data on the same data medium (e.g. hard disk), thus personalizing
these data, he has to ensure compliance with the applicable data protection stipulations.
Further Internet links
Generic station description file (GSD) for
PROFIBUS (https://support.industry.siemens.com/cs/ww/en/view/98206128)
PROFINET (https://support.industry.siemens.com/cs/ww/en/view/98207877)
6
SINAMICS DCM Control Module
Operating Instructions, 12/2018, A5E34888669A