MOWER DECKS
5. Rotate the belt guide into place so that it is approxi-
mately 1/8" (3mm) away from the PTO drive belt
(Fig. 1156).
6. Tighten the nut securing the center spindle belt
guide to the mower deck (Fig. 1157).
8
8-4
Fig 1156
PICT-1031
Fig 1157
PICT-1023a
7. Install the carrier frame cover (Fig. 1158).
Fig 1158
Mower Spindle Drive Belt Removal
(36" Mower Deck)
1. Remove the PTO drive belt. Refer to "PTO Drive Belt
Removal" on page 8-8.
2. Unhook the idler spring from the spring post (Fig.
1159).
Fig 1159
Floating Deck Mid-Size Service Manual
PICT-1022
PICT-1448