Toro 30284 Service Manual page 276

31. Route the deck drive belt around the clutch (Fig.
0922).
Fig 0922
32. Install the idler arm spring to the spring post (Fig.
0923).
Fig 0923
Floating Deck Mid-Size Service Manual
33. Install the trailing shield into the frame by fi rst insert-
ing the right side of the trailing shield rod (bent at
a 90 degree angle) into the hole in the chassis and
then insert the left end of the trailing shield rod (bent
at a 45 degree angle) into the hole in the chassis
(Fig. 0924).
PICT-1365a
34. Lower the machine.
35. Roll the deck drive belt onto the fi xed (center) mower
deck pulley (Fig. 0925).
PICT-1364
ENGINE
Fig 0924 PICT-1362
Fig 0925 PICT-1361
5
5-35