Toro 30284 Service Manual page 113

LINKAGE
3. Position the pump adapter bracket to the pump
linkage (Fig. 0310).
4
4. Install 2 bolts and nuts securing the pump adapter
bracket to the pump linkage (Fig. 0311).
4-6
Fig 0310 PICT-1989
Fig 0311 PICT-1983
The distance between the face of the neutral prox-
imity switch and the end of the hex head screw
should be .07" + .02" (1.8 + .5mm) (Fig. 0312).
Fig 0312
A. .07" ± .02" (1.8 + .5mm)
5. If adjustment is needed, refer to loosen the jam nut,
adjust the hex head screw until proper distance is
achieved and then tighten the jam nut to secure.
Control Linkage Assembly (Fig. 0313):
A B
Fig 0313
A. Lower control rod
B. Wingnut
C. Turnbuckle
Floating Deck Mid-Size Service Manual
A A
PICT-1943
C D E
PICT-1969a
D. Wingnut
E. Upper control rod