Hydraulic Pump Removal - Toro 30284 Service Manual

HYDROSTATIC DRIVE SYSTEM

Hydraulic Pump Removal

1. Clean the area around the pump and hydraulic
fi ttings to prevent dirt and debris from entering the
system.
2. Remove the idler spring to relieve tension from the
hydro drive belt (Fig. 0975).
3. Slip the hydro drive belt off the pulley (Fig. 0976).
6
6-12
Fig 0975 PICT-0402
Fig 0976 PICT-0403
4. Loosen the two pulley hub set screws (Fig. 0977).
Fig 0977
5. Slide the pulley off the hydraulic pump shaft (Fig.
0978).
Fig 0978
Floating Deck Mid-Size Service Manual
PICT-0405a
PICT-0406