Parking Brake Removal - Toro 30284 Service Manual

CHASSIS
7. Install a cotter pin into the clevis pin (Fig. 0058).
3
8. Check the brake operation again. Refer to "Checking
the Parking Brake" on page 3-14.

Parking Brake Removal

1. Release the parking brake.
2. Remove the cotter pin from the clevis pin at the top
end of the parking brake adjusting rod (Fig. 0059).
3-16
Fig 0058 PICT-0470
Fig 0059 PICT-0470
3. Remove the clevis pin securing the top end of the
parking brake adjusting rod to the parking brake
handle (Fig. 0060).
Fig 0060
4. Remove the cotter pin from the clevis pin securing
the lower yoke of the brake adjusting rod to the
parking brake assembly (Fig. 0061).
Fig 0061
Floating Deck Mid-Size Service Manual
PICT-0471
PICT-0477