Toro 30284 Service Manual page 295

HYDROSTATIC DRIVE SYSTEM
3. Install the 2 set screws into the control shaft (Fig.
0990).
4. Hook the hydro pump spring to the bolt on the
control shaft (Fig. 991).
6
6-16
Fig 0990 PICT-0430
Fig 991 PICT-0427a
5. Install 2 bolts and nuts securing the pump to the
frame (Fig. 0992).
Fig 0992
6. Install the 2 high pressure hoses to the fi ttings on the
pump (Fig. 0993).
Note: Ensure that the marked hose is connected to
the marked port on the pump.
Fig 0993
Floating Deck Mid-Size Service Manual
PICT-0429
PICT-0425