Toro 30284 Service Manual page 169

LINKAGE
3. Position the drive lever swivel through the frame and
onto the hydro pump shaft (Fig. 0531).
4
4. Apply thread locking compound to both drive lever
swivel set screws (Fig. 0532).
4-62
Fig 0531 PICT-0917
Fig 0532 PICT-0922a
5. Install the 2 set screws securing the drive lever
swivel to the hydro pump shaft (Fig. 0533).
Note: There is an access hole located in the frame
below the drive lever swivel.
Fig 0533
6. Position the neutral adjustment stud yoke to the
drive lever swivel and install a clevis pin (Fig. 0534).
Fig 0534
Floating Deck Mid-Size Service Manual
PICT-0916
PICT-0915