Toro 30284 Service Manual page 154

2. While supporting the crank support, loosely install
the 2 upper bolts and nuts securing the crank
support and handle to the frame (Fig. 0472).
Note: The bolts are installed with the nuts on the
outside of the frame.
Fig 0472
3. Install the 2 lower bolts and nuts securing the crank
support assembly to the frame (Fig. 0473).
Note: The bolts are installed with the nuts on the
inside of the frame.
Fig 0473
Floating Deck Mid-Size Service Manual
4. Tighten the 4 nuts and bolts securing the crank
support to the frame.
5. Apply thread locking compound to the threads of the
2 shoulder bolts that secure the speed control crank
to the crank support (Fig. 0474).
PICT-0787
6. Position the speed control crank to the crank support
(Fig. 0475).
Note: The choke cable is positioned between the
speed control crank and the crank support.
PICT-0786
LINKAGE
Fig 0474 PICT-0815a
Fig 0475 PICT-0816
4
4-47