42. Tighten the jam nuts securing the speed control rod
trunnion in place (Fig. 0512).
Fig 0512
43. Initially adjust the Neutral Stud. Refer to "Temporary
Neutral Stud Adjustment" on page 4-122.
44. Adjust the Speed Control Linkage. Refer to "Speed
Control Linkage Adjustment" on page 4-121.
45. Adjust the Neutral Stud. Refer to "Neutral Stud
Adjustment" on page 4-126.
Floating Deck Mid-Size Service Manual
Drive Lever Swivel & Bearing
Replacement (Pistol Grip Hydro)
PICT-0898
Drive Lever Swivel & Bearing Removal
1. Turn the engine off and remove the key from the
ignition.
2. Remove the neutral return spring from the lower tab
on the drive lever swivel (Fig. 0514).
LINKAGE
Fig 0513
fi g. 10 G004912
Fig 0514
PICT-0900
4
4-57