LINKAGE
11. Install an e-clip onto the trunnion on the lower end of
the drive lever rod (Fig. 0539).
4
12. Position the side fl ange bearing to the side plate
(Fig. 0540).
4-64
Fig 0539
PICT-0908
Fig 0540
PICT-0907
13. Install a fl at washer onto the 2 bolts used to secure
the bearing to the side plate. Loosely install the
bearing to the side plate with the 2 bolt assemblies
and nuts (Fig. 0541).
Fig 0541
14. Position the side plate so the bearing is installed on
the hydro control shaft (Fig. 0542).
Fig 0542
Floating Deck Mid-Size Service Manual
PICT-1015
PICT-1016