3. Plug the harness into the OPC switch (Fig. 1507).
Fig 1507
4. With either LH or RH OPC lever depressed inspect
space between Neutral Arm on OPC Rod and the
body of the OPC Switch. The space should be .18" ±
.06" (4.6 ± 1.5mm) (Fig. 1508).
A A
Fig 1508
A. .18" ± .06" (4.6 ± 1.5mm)
Floating Deck Mid-Size Service Manual
5. If needed, adjust the position of the switch. Refer
to OPC Switch Position Adjustment (P.G.) in the
following section.
6. Position the cover bracket onto the control panel
(Fig. 1509).
PICT-1857
7. Install 2 screws securing the control panel cover
bracket to the front side of the control panel (Fig.
1510).
PICT-1864
ELECTRICAL
Fig 1509
PICT-1848
Fig 1510
PICT-1847
9
9-37