Lower Control Replacement (T-Bar)
The following procedures are the same for both the right
hand and left hand lower control replacement.
Fig 0353
Lower Control Removal
1. Turn the engine off and remove the key from the
ignition.
2. Remove the hairpin cotter from the lower end of the
control rod (Fig. 0354).
Fig 0354
Floating Deck Mid-Size Service Manual
3. Remove the washer from the lower end of the con-
trol rod (Fig. 0355).
fi g. 7 G004812
4. Remove the trunnion/clevis from the idler arm (Fig.
0356).
PICT-1750a
LINKAGE
Fig 0355
PICT-1752
Fig 0356
PICT-1753
4
4-17