Toro 30284 Service Manual page 81

CHASSIS
4. Place a 2"x2" by 8" (aprox.) long piece of tubing
stock on the engine deck along the right side the
engine (Fig. 0195).
3
5. Hold a ridid straight edge (36" minimum length) on
top of the 2"x2" piece of tubing stock so it reaches
out to the front cross brace of the carrier frame (Fig.
0196).
3-52
Fig 0195 PICT-1339
Fig 0196 PICT-1341
6. The space between the front cross brace and the
straight edge should be 11/16" + 1/4" (17.46mm +
6.35mm) (Fig. 0197).
Fig 0197
If the space is not correct, adjustment is needed:
7. Loosen the 6 carrier frame mounting bolts (3 on the
left, 3 on the right) (Fig. 0198).
Fig 0198
Floating Deck Mid-Size Service Manual
PICT-1345
PICT-1303