Toro 30284 Service Manual page 238

If the motion control levers do not align front to back,
or the right side control lever does not move easily
into the neutral lock position, adjustment is required.
Adjust each lever and control rod separately.
Note: Adjust the horizontal alignment before the
front to back alignment.
1. After the horizontal alignment is fi nished, check the
front to back alignment (Fig 0778).
A
Fig 0778
A. Left motion control
lever
B. Right motion control
lever
Floating Deck Mid-Size Service Manual
B
C
D
fi g. 52 G006096
C. Neutral locked position
D. Align the control levers
front to back here
2. Loosen the wing nuts on the right control rod and
rotate the turnbuckle in or out to ensure the right
side control lever is centered in the neutral lock
position. Secure the turnbuckle in position with the
wing nuts (Fig. 0779).
C
A
B
Fig 0779
A. Turnbuckle
B. Bottom wing nut
3. Loosen the wing nuts on the left control rod and
rotate the turnbuckle in or out to change the tracking.
Secure the turnbuckle in position with the wing nuts
(Fig. 0779).
4. Check for proper tracking. Adjust the left control rod
if a change is needed. Refer to "Tracking Adjustment
(Pistol Grip)" on page 4-129 or "Tracking Adjustment
(T-2)" on page 4-130.
LINKAGE
fi g. 36 G006085
C. Top wing nut (left hand
threaded)
4-131
4