Toro 30284 Service Manual page 71

CHASSIS
6. Install a new retaining ring onto the brake arm pivot
securing the brake arm to the frame (Fig. 0158).
3
7. Position the lower end of the brake rod into the
brake arm. Install a hairpin cotter securing the brake
rod to the brake arm (Fig. 0159).
3-42
Fig 0158 PICT-1621
Fig 0159 PICT-1596
8. Slide the wheel hub assembly onto the axle (Fig.
0160).
Fig 0160
9. Install the castle nut onto the axle (Fig. 0161).
Fig 0161
Floating Deck Mid-Size Service Manual
PICT-1594
PICT-1653