Toro 30284 Service Manual page 282

10. Remove the bolt, nut, 2 washers and spacer secur-
ing the brake clutch strap to the underside of the
chassis (Fig. 0940).
Fig 0940
11. Unhook the hydro idler pulley spring from the tab on
the chassis (Fig. 0941).
Fig 0941
Floating Deck Mid-Size Service Manual
HYDROSTATIC DRIVE SYSTEM
12. Remove the bottom bolt, nut and spacer securing
PICT-0295
13. Loosen the nut securing the hydro idler shoulder
PICT-0559
the right hand side plate to the frame (Fig. 0942).
Fig 0942
bolt to the frame until there is enough clearance for
the hydro belt to pass over the top of the idler pulley
assembly (Fig. 0943).
Fig 0943
PICT-0562
6
PICT-0563
6-3