Toro 30284 Service Manual page 37

CHASSIS
12. Install the PTO idler arm spring to the spring post
(Fig. 0027).
3
13. Install the trailing shield into the frame by fi rst insert-
ing the right side of the trailing shield rod (bent at
a 90 degree angle) into the hole in the right side of
the frame and then insert the left end of the trailing
shield rod (bent at a 45 degree angle) into the hole
in the left side of the frame (Fig. 0028).
3-8
Fig 0027 PICT-0367
Fig 0028 PICT-0273
14. Lower the machine.
15. Roll the PTO drive belt onto the center mower deck
pulley (Fig. 0029).
Fig 0029
16. Replace the carrier frame cover (Fig. 0030).
Fig 0030
Floating Deck Mid-Size Service Manual
PICT-0281
PICT-0280