Castor Wheel Fork Bushing Replacement; Castor Wheel Fork Bushing Removal - Toro 30284 Service Manual

CHASSIS
Castor Wheel Fork Bushing
Replacement
The following procedures are the same for replacing
both the right hand and left hand castor wheel fork
bushings.

Castor Wheel Fork Bushing Removal

1. Turn the engine off and remove the key from the
3
ignition.
2. Raise the carrier frame assembly so the caster
wheels are off the fl oor and support the front of the
mower with jack stands.
3. Remove the locking pin from the top of the caster
fork (Fig. 0227).
3-60
Fig 0227 PICT-1316
4. Remove the spacer(s) from the top of the caster
wheel fork (Fig. 0228).
Fig 0228
5. Slide the caster wheel fork assembly out of the
mounting tube. Leave the spacer(s) on the bottom
of the fork (Fig. 0229).
Note: Note the location and number of the spacers
on each fork to ensure correct installation,
and maintain a level deck.
Fig 0229
Floating Deck Mid-Size Service Manual
PICT-1317
PICT-1319