Checking The Mower Deck Front-To-Rear Pitch - Toro 30284 Service Manual

Checking the Mower Deck Front-to-
Rear Pitch
1. Adjust the tire pressure in the rear tires to 12-14 psi
(83-97kPa).
2. Position the mower blades so they are in the front-
to-rear orientation. Measure at AA and BB locations
from a level surface to the cutting edge of the blade
tips (Fig. 000 and for 36" mower decks use Fig.
1385).
3. The mower blades should be 1/4" (6mm) lower at
location AA than at location BB.
4. If the front-to-rear pitch is not correct, proceed to
Adjusting the Deck Front-to-Rear Pitch.
Fig 1385
This illustration shows a 40", 48" and 52" mower deck.
A. Measure blade at
points AA and BB
Floating Deck Mid-Size Service Manual
B
AA
BB
A
fi g. 82 G001041
B. Measure from a level
surface
MOWER DECKS
AA
BB
Fig 1386
This illustration shows a 36" mower deck.
fi g. 83 G004906
8
8-65