Toro 30284 Service Manual page 337

GEAR DRIVE
22. Slide the driven pulley onto the transmission drive
shaft (Fig. 1137).
23. Tighten the set screw securing the transmission
driven pulley to the transmission driveshaft (Fig.
1138).
7
7-24
Fig 1137 PICT-1571
Fig 1138 PICT-1511
24. Install a retaining ring onto the end of the transmis-
sion drive shaft (Fig. 1139).
Fig 1139
25. Route the drive belt onto the transmission driven
pulley (Fig. 1140).
Fig 1140
Floating Deck Mid-Size Service Manual
PICT-1510
PICT-1575